Eni-Florence Battery Joint Stock Company Add: Lo C12 - Khanh Phu Industrial Zone - Yen Khanh - Ninh Binh - Vietnam Tel: (+84)2293 762 678 Fax: (+84) 303 762 345 Email: contact@eni-florence.com
Specifications
| Nominal Voltage (V) | 12 V |
| Nominal Capacity | 20 hour rate (1.25 A to 10,50 V) 25 Ah |
| Weight | Approx. 5.3 ± 3% Kg 11.68 ± 3% Lbs) |
| Cold Cranking Amperes (-17.8°C) | 120 A |
| Storage Capacity (RC, 25A duration time) | 35 min |
| Design life at 25°C | 3~5 year |
| Case Material | PP |
| Terminal T2 (AS series -IEC60095-2:2009) | mm (inch) |
Enimac N25-2Cọc
Dimension
| Length (L) | 247 +- 2 (9.72 +- 0,08) |
| Width (W) | 96 +- 2 (3.78 +- 0,08) |
| Height (H) | 170 +- 2 (6.69 +- 0,08) |
| Overall Height (HT) | 190 +- 2 (7.48 +- 0,08) |
Chargin Method
| 1. Charging at constant voltage and constant Current (two step method) | |||
|---|---|---|---|
| Step | Chargin Voltage | Chargin current | Chargin time |
| 1 | 14,8 +- 0,1V | Max 6.25 A | 20h |
| 2 | - | 1.25 A | 4h |
| 2. Charging at constant +Current (one step method) | |||
| Step | Chargin Voltage | Chargin current | Chargin time |
| 1 | - | 2.5 A | Until voltage Stabilisation is established when three consecutive voltage or specific density measurements taken at 15 mins interrvals, remain constant |
Operating Temperature Range
- Nominal Operating Temperature : 25℃ (77℉)
- Storage: 5℃ ~ 40℃ (41℉~104℉)
- Discharge : -30℃ ~ 60℃ (-22℉~140℉)
- Charge: -30℃ ~ 60℃ (-22℉~140℉)
- High current charging at high temperatures above 50 degrees Celsius may cause acid leakage in the air outlet.
Storage
- Can be stored up to 6 months at 25℃ (77℉);
- If the battery is below 12.4V , battery must be recharged as soon as possible to prevent lead sulfation;
- Fully recharging is required before usage, and charged sooner if stored at higher temperature than 25℃ (77℉)
Export: Tell (+84)2293 762 678 DaNang Office: Tell (+84)2293 762 678 HCM Office: Tell (+84)2839 453 447